The homeowner zero-turn — cut the lawn in half the time and enjoy the seat doing it.

| Model | Engine HP | Deck | Deck type | Transmission | Speed | Weight | Fuel type | Acreage/hr |
|---|---|---|---|---|---|---|---|---|
| Z232KW-42 | 21.5 HP | 42" | Side discharge | Hydro-Gear® ZT-2200 | 6.5 mph | 643 lb | Gasoline | 1-5+ acres |
| Z242KH-48 | 22 HP | 48" | Side discharge | Hydro-Gear® ZT-3100 | 8 mph | 811 lb | Gasoline | 1-5+ acres |
| Z242KW-48 | 21.5 HP | 48" | Side discharge | Hydro-Gear® ZT-3100 | 8 mph | 844 lb | Gasoline | 1-5+ acres |
| Z252KH-54 | 26 HP | 54" | Side discharge | Hydro-Gear® ZT-3100 | 8 mph | 827 lb | Gasoline | 1-5+ acres |
| Z252KW-54 | 24 HP | 54" | Side discharge | Hydro-Gear® ZT-3100 | 8 mph | 860 lb | Gasoline | 1-5+ acres |
The Z200 is Kubota's residential zero-turn line, sized and priced for homeowners mowing their own property rather than a commercial crew running all day, every day. It's the natural first zero-turn for someone stepping up from a lawn tractor.
With 42 to 54 inch deck options, the Z200 is built for properties in roughly the 1 to 3 acre range. If you're regularly mowing more than that, or covering more than one property, the heavier-built Z400 is worth a look instead.
A zero-turn steers by driving the wheels independently instead of turning a front axle, so it pivots in place rather than needing a wide turning radius. That means fewer passes around trees, beds and obstacles, and a noticeably faster cut overall.
The Z200 series runs gas engines, which keeps upfront cost down and suits the lighter, part-time duty cycle most homeowners put a mower through. Diesel commercial machines like the ZD series are built for daily fleet-level use, not typical weekend mowing.
Actually, the Z200 already uses Kubota's fabricated, welded steel deck — a 10-gauge welded design, not a lighter stamped deck. Kubota builds its zero-turn decks this way across the whole lineup, from the Z200 up through the commercial Z700 and ZD series; what changes as you move up the range is deck gauge, depth and features, not a switch from stamped to fabricated construction.
Tell me about your property and the work you need done — I'll point you to the right machine, even if it isn't this one.
Tell me what you're working with